The Vertical Acoustic Doppler Current Profiler (Vertical ADCP) is designed for the high-accuracy measurement of water flow, level and velocity profile in open channels, rivers, streams, and irrigation channels.
The Vertical ADCP can be deployed as a self-contained instrument recording data for later use; as a real-time instrument for real-time measurements; or as a portable flow meter, with the option to move from station to station.
Key Features:
Teledyne RDI’s Broadband technology , which allows for small cells and/or short averaging/sampling intervals and highly accurate velocity data.
Range of 3–150 user-selectable velocity measurement cells, with cell sizes from 3cm–20cm and profiling range from 0.2m–5m.
Small transducer mounted to bottom of open channel allows for less flow disturbance.
Accurate acoustic water level sensor.
No calibration required, providing a cost-effective solution.
                                            
                                         
                                        
                                            Water Velocity Profiling	Profiling range	0.2m1 to 5m2	
(Broadband mode)	Velocity range	±5m/s default, ±20m/s maximum
Accuracy	±0.5%, ±2mm/s	
Resolution	1mm/s	
Number of cells	3–150	
Cell size	3cm to 10cm	
Blanking distance	3cm	
Data output rate	User-programmable, 1Hz maximum
Flow measurement accuracy	2-5%3	
Transducer and Hardware	Frequency	2.4mHz	
Configuration	Three beams (velocity measurement)
Beam angle	20°, ±25°	
Beam width	0.95°	
Internal memory	4MB	
Communications	Interface: RS-232	
Baud rate: 1200 to 115,200bps	
Standard Sensors	Sensor	Temperature	Acoustic Stage
Range	-5°C to 45°C	0.1-10m (default)
Accuracy	±0.5°C	±0.1%, ±3mm
Resolution	0.01°C	0.1mm
Software	WindowsTM-based: • PlanCV: Deployment planning	
• Q-Monitor-V: System set-up, data acquisition, playback, and flow calculation
Power	Input	10–28VDC	
Internal battery	3@6VDC alkaline lantern batteries, 570wh
Consumption	0.11w @ 10% duty cycle	
Environmental	Operating temperature	-5°C to 40°C	
Storage temperature	-25°C to 60°C	
Vibration	meets IEC 60721-3-2 standard	
Housing weight	5.2kg (with internal battery)	
Dimensions	
Housing	Length 340mm; width 180mm; depth 140mm
Transducer	Length 202mm; width 92mm; depth 39mm
1Q94;Assume one good cell (minimum cell size); range measured from the transducer surface.	
2Q94;Assume fresh water; actual range depends on temperature and suspended solids concentration.	
3Q94;Assume narrow channels.