Product Features
Quick: Collect complete streamflow measurements in streams or canals in a matter of minutes.
• Convenient: No need to move from station to station. Simply cross a bridge or use a tagline to collect data.
• Easy to Operate: Data is conveniently acquired using a PocketPC or a laptop equipped with a highly intuitive user interface.
• Reduced Disturbance: Small transducer head, 3.5cm in diameter, for minimal flow disturbance. • Affordable: Value-priced system designed to suit your budget.
• Bottom Tracking: Reliable bottom-tracking in 0.1m–7m depth.
• Wireless: Bluetooth communications utilized between electronics and PocketPC or laptop.
• Low Power Consumption: Full day of operation on 8 AA batteries.
• Versatile: Minimum cell size 2cm with up to 30 cells. Standard profiling range of up to 2m (6m with upgrade).
• Flexible Data Format: All acquired data is compatible with Teledyne RDI’s WinRiver II software for data display and processing.
                                            
                                         
                                        
                                            Range	-4° to 45°C
Accuracy	±0.5°C
Operation Modes	
Standard profiling (Broadband)	
High-precison profiling (included)	
Transducer	
Frequency	2MHz
Configuration	Janus 4 beams at 20° beam angle
Software	
• StreamPro Software for Pocket PC
• WinRiver II (included) for moving-boat measurement
• SxS Pro (optional) for stationarymeasurement
Available Upgrades	
• Extended profiling range to 6 meters	
• SxS Pro Software for stationary measurement.	
• Compass and tilt (pitch and roll) sensors	
• GPS	
• High-speed float	
Communications	
Bluetooth wireless	
Baud rates: 115,200 bps	
Construction	
Cast polyurethane with stainless hardware	
Power	
Voltage	10–13.5VDC (8 AA batteries, alkaline or rechargeable NiMH)
Battery capacity	7.5 hours continuous with 8 AA alkaline batteries;
Environmental	
Operating temperature: -5°C to 45°C	
Storage temperature	: -20°C to 50°C
Physical Properties	
Weight in air	5.9 kg including electronics, transducer, float, and batteries
Dimensions	Electronics housing: 16 x 21 x 11cm Transducer: 3.5cm diam. x 15cm length
Float: 42 x 70 x 10cm (line drawings available upon request)
1Q94;Assume one good cell (minimum cell size) with high precision profiling mode, range measured from the transducer surface.
2Q94;Assume fresh water, actual range depends on temperature and suspended solids concentration.
3Q94;2m/s for standard float; 3.5m/s for optional high-speed float.
4Q94;Assume uniform water temperature and salinity profile	
Specifications subject to change without notice